SOLVER POLYIMIDE
Products
Hot Products

SolverPI-Rigid Foam

SolverPI-Rigid Foam

Product Name: Rigid Polyimide Foam Item No.: SolverPI-Rigid Foam Since 2010, based on the original technology and refer ourself to the international technical standard, SOLVER POLYIMIDE developed a new type of rigid PI foam integrated production line has been built, with1000MT annual output....

 Product Name: Rigid Polyimide Foam

Item No.: SolverPI-Rigid Foam

 

Since 2010, based on the original technology and refer ourself to the international technical standard, SOLVER POLYIMIDE developed a new type of rigid PI foam integrated production line has been built, with1000MT annual output. With different needs,we can produce the PIfoam of density and intensity. The PI foam has the characters of high and low heat resistence, High fire retardent,radiation resistence,wave-transparent,microwave absorpting,anti-corrosion,longlife,excellent comprehensive properties,the high rate of obturator,easy processing. It can be widely used in aviation, spaceflight, navigation, transportation, construction and so on.

This product has past the fire retardancy test in the Yuandong fire experiment center.And the result show that our material is in well accordance with the technique target of smoke densitytoxicity testlow flame-spread combuston heat value inInternational fire test program application rulesrequire.The room temperature emissionshigh temperature split productinhalation toxicity experiments on animals are in accordance with human bddy health standards after Non metallic material inspection center of People’s Liberation Army Navy detection.

 

APPLICATIONS:

The application in aerospace

The spherical frame is the air tight cockpit terminal.And it is the thin-wall construction which is mainly made of ball coversplit-stopping tapespherical frame edge and such components.The spherical frame will produce fatigue crack because of the airtight loading during the airplane ground-sky-ground process.So the key problem is how to prevent the airtight cabin fatigue damage.The rigid PIfoam plastic interlayer reinforcement structure can greatly improve the stability of the spherical frame and ruduce the weight of the spherical frame.

The rigid PI foam is used as core material of alae nasi parva,flap and airtight bulkhead in aircraft.The rigid PI foam has the extraoridinary fatigue resistence.It can be used in roter on the advanced high performance helicopter.It can take the load from the roter’s rotation and prolong the life of roter.

 

The application in transportation

The rigid PI foam with the density 52kg/m3,is characterized by high strength and high creep resistence.The PI foam as the composite core material adopt the co-cure process mading the 5cm carbon diber and PI rein stressed-skin construction which can be used as self-host truck body Sighificantly reducing the traffic noise.The structure made of two reinforcing PI rigid foams can produce the bonnet and top cap.

 

The application in ships and warships

(1)The side shell,bulkhead,top of the carbin which have the requirement of heat insulation,sound insulation.

(2)The cooling pipeline and high temperature steam pipeline over 37.

(3)The submarine shell and frame part need processing of sound transmission loss

(4)The submarine and frame parts which do the heat and steam isolation avoid of the fog.

<!--[if !supportLists]-->(5)<!--[endif]-->Cryogenic vessel preservation.

 

Apperance requirements

1.1Surface:The surface should be smooth,the form hole be well-distributed.

2.2Qualty:Product quality and conditions should be consistent,clean,no impurities and defects affecting the processing or material properties.

1.3Color:The original color unless special provision.

1.4Toxicity:Avirulent,no harm to the skin long-term exposure.

1.5Odour:Odorlessness.

1.6Thickness:Based on the order,the error&plusmn;5 is permitted.

Technical requirement

Table 1 the specification of rigid PI foam

Model/Performance

Test item

Technical requirement

Test Standard

Rigid PI foam

Physicochemical properties

Apparent density,kg/m&sup3;

70~110

110~200

GB/T 6343 The determination of apparent density of foam   and rubber.

 

Thermal conductivity,W/m,K(23℃&plusmn;2)

0.04

GB/T10295 The determination of insulation material of   thermal,heat flow meter method.

96hThe moisure absorption rate(relative humidity95%,temperature 49℃&plusmn;2)

5

GB/T20312 The determination of consruction material and   the products&rsquo;hygrothermal performance,moisure absorption performance

Radiation resistence

There is not marked change apparent when radiation dose   attain 200000Gy.

JJF1018We use the potassium bichromate(silver)dose to   measure the ray water uptake dose

Temperature resistence

No crack,55 Not stick,200,12h

GB/T9640Flexible and rigid foam polymer   materials,accelerated aging test

Acid resistence(20hydrochloric acid)

There is not change after steeped for 24h.

------

Alkali resistence(10 caustic soda)

There is not any change in surface after for 24h.

-------

Petrol resistence(120#petrol)

There is not any change in volum after steeped for 24h.

-------

Tensile srength,MPa

0.2

0.3

GB/T6344Flexible foam polymer materials,the   determination of tensile srength and crack growth rate

Compressive strength(10)MPa

0.35

0.45

GB/T8813 The determination of rigid foam&rsquo;compression   performance

Toxicity of material

Ordinary temperatures toxicity

Meet the requirement of GJB 11.2GJB 11.3 rules.

GJB11BNuclear submarine cabin air composition allowable   concetration requirements.

GJB3881Toxicity assessment of nonmetallic materials for   ship.

Oridinary temperatures smoke and toxicity

Meet the requirement of FTP&rsquo;s rules

IMO 2010FTP Part2 of rule The smoke and toxicity   testing procedures

Fire protecting performance

(limit)Oxygen index,

40

GB/T2406.2 Determination of the burning behaviour of   plastics by oxygen index method.Part 2 greenhouse experiment.

 

Density of smoke(Dm)

(Flameless mode flame mode)

200

GB/T10671 Test method for specific optical density of   smoke generated by solid materials

Flame resistence

After leaving the fire ignited material 1s self   extinguishing and no droplet

GB/T2408 Test method for flammability of plastics.Level   method and vertical method

Low flame spread

Meet the requirement of FTP

IMO2010FTP The rule part 5-The surface materials   flammability testing procedures

Combustibility

Heat of combustion,MJ/

45

ISO1716The determination of heat of combustion

Workability

The construction technology

No dust,easyto cut,easy packaging,construction   technology can meet the requirements of the users.

-------

Acoustical behavior

Noise reduction cofficient

0.6

GB/T18696.1 The measurement of the acoustic impdance of   sound absorption coefficient and impedance in tube Part1:Voltage Standing   Wave Ratio

The concentration of harmful gases does not exceed the requirements of GJB 11B provisions of the cabin air froup divided allowable concetration.The material of the median lethal concentration LC5050g/m3.

According to the 2010FTP rules of Annex 1 second part2--The smoke and toxicity testing procedures under the condition of high temperature and smoke density detection materials smoke toxicity.The average optical density ratio requirement of flue gas(Dm)200;The smoke toxicity concentration was less than the limit value in table 2.

Table 2 The limit value of toxics smoke concentration(Unit:ppm)

Smoke components

CO

HBr

HCI

HCN

HF

SO2

NOX

Smoke density

1450

600

600

140

600

120

350

Note:SO2 for floor coverings,this index is 200ppm

According to the 2010FTP rules of Annex 1 second part 5--Material testing for pocedures for combusion,See Table 3 for specific requirements.

Table 3 PI foam surface burning characteristics

No.

Surface combustion characteristic index

Allowable value

1

Go out when the critical heat flux,kW/

20.0

2

Continuous combustion heat,MJ/

1.5

3

Gross heat release,MJ

0.7

4

The heat release peak,Kw

4.0

 

Storage:The material must be stored in damp-proof packing and keep dry,the packing meet the need of military standard.

Characteristic

Lable the message in the corner of every panel as follow:

<!--[if !supportLists]-->1、<!--[endif]-->Material standard number,type,specification.

<!--[if !supportLists]-->2、<!--[endif]-->Lot No.and date of producted.

<!--[if !supportLists]-->3、<!--[endif]-->Lot

<!--[if !supportLists]-->4、<!--[endif]-->Logo of company.

<!--[if !supportLists]-->5、<!--[endif]-->Order No.(out packing only)

<!--[if !supportLists]-->6、<!--[endif]-->Quantity of load(out packing only)

<!--[if !supportLists]-->7、<!--[endif]-->Production address.

 


Hot Tags: SolverPI-Rigid Foam,Polyimide Foam
  • Company Profile
    SOLVER POLYIMIDE founded in 2010 November, is a professional and high-tech manufacturer of POLYIMIDE (PI) and its products with the name “GOLDEN PLASTIC”. SOLVER POLYIMIDE is one of the manufactures of Thermoplastic Polyimide, Thermosetting Polyimide, Polyimide Powder, Polyimide Pallet, Polyimide Liquid, Polyimide Profile, Polyimide Particle, Polyimide Monomer, Polyimide Foam , Polyimide Resin, Polyimide Coating, Polyimide Composite Material, Polyimide Liquid Crystal Alignment Agent and so on. thermoplastic polyimide factory, company, wholesale, buy, products. SOLVER POLYIMIDE’S polyimide is a kind of high performance engineering plastic. It not only has excellent thermal, mechanical, dielectric, dimensional stability, corrosion resistance and anti-radiation performance, but also has good machinability. It can be shaped through different methods such like molding, extrusion, injection molding and injection....
  • Product Category
  • Contact Us
    Address:Room 1401, Peninsula International Mansion, Jiande City, 311600 Zhejiang Province, China
    Tel: +86-571-64537063
    Fax: +86-571-64537093
@2016 SOLVER POLYIMIDE.All rights reserved.    
Add: Room 1401, Peninsula International Mansion, Jiande City, 311600 Zhejiang Province, China